Pore‐free mold‐pattern‐transfer method for barrier ribs of HD PDPs

Abstract— Among various barrier‐rib manufacturing processes, the mold‐pattern‐transfer method has potential to reduce processing cost as well as the manufacture of high‐resolution pixels. In this study, the effects of major processing variables of the mold‐pattern‐transfer process on the formation of air‐trapped pores within barrier ribs were examined. The results indicated that with an optimum combination of the processing variables, barrier ribs without trapped defects can be produced, demonstrating the possibility of reducing the number of processing steps and costs of barrier ribs.     

焦化生产废水零排放的探索与实践

对焦化厂生产废水的来源及污染指标进行了分析,介绍了金马焦化公司废水的净化处理、回收循环利用,以及实现焦化厂生产废水零排放,提高资源利用率的探索与实践.     

The result of a wall failure in-pile experiment under the EAGLE project

The WF (wall failure) test of the EAGLE program, in which 2 kg of uranium dioxide fuel-pins were melted by nuclear heating, was successfully conducted in the IGR (Impulse Graphite Reactor) of NNC/Kazakhstan. In this test, a 3 mm-thick stainless steel (SS) wall structure was placed between fuel pins and a 10 mm-thick sodium-filled channel (sodium gap). During the transient, fuel pins were heated, which led to the formation of a fuel-steel mixture pool. Under the transient nuclear heating condition, the SS wall was strongly heated by the molten pool, leading to wall failure. The time needed for fuel penetration into the sodium-filled gap was very short (less than 1 s after the pool formation). The result suggests that molten core materials formed in hypothetical LMFBR core disruptive accidents have a certain potential to destroy SS-wall boundaries early in the accident phase, thereby providing fuel escape paths from the core region. The early establishment of such fuel escape paths is regarded as a favorable characteristic in eliminating the possibility of severe re-criticality events. A preliminary interpretation on the WF test results is presented in this paper.     

河道生产堤对洪水影响的二维数值模拟研究

河道主槽两侧修建的生产堤影响滩槽泥沙横向交换,对河床演变带来很大影响。本文针对黄河下游游荡型河段的现实状况,采用平面二维水沙数学模型按现状生产堤、废除生产堤、限制生产堤三种条件进行了典型洪水的模拟,模拟计算给出了夹河滩-高村河段不同边界洪水演进、漫滩的过程及滩区淹没程度。作者分析了三种不同边界条件对洪水水位、河段流速、滩槽冲淤的影响,表明废除生产堤使洪水提前进滩,与现状生产堤状态相比大大降低了河道洪水位;限制生产堤方案可以适当控制漫滩流量,扩大滩槽泥沙横向交换,改善滩区生产条件。为了维持黄河河槽活力,协调人河关系,抑制二级悬河发展,限制下游河道生产堤治理方案是比较适宜的。     

岩石液压致裂中几个问题的研究

论证了流体压力变化与岩石强度变化之间的关系，阐述了流体保持与释放的应力条件和构造环境，总结了两种围岩下的液压致裂模型及其流量方程。     

小型腔式微波离子源的研制

研制了１种用在离子束细胞刻蚀装置中的小型腔式微波离子源，它由石英放电管、同轴谐振腔和封装在管一端的二电极引出系统组成。该源由同轴腔激发起的表面波在石英管内产生等离子体柱。为了提高柱末端等离子体离子引出流密度，选用了在内径７．０ｍｍ直管的一端加上一内径５．０ｍｍ衬管的放电管。在微波频率为２．４５ＧＨｚ，输入功率为９３Ｗ下，氮的引出流密度分别为４８．４ｍＡ／ｃｍ２和９１．７ｍＡ／ｃｍ２。这种表面波放电等离子体源体积小、结构简单，可在较宽的压强范围内产生重复性好、工作稳定的等离子体柱。     

双层辉光离子渗镀钽

介绍了一种新型离子渗镀钽的工艺方法。较好解决了渗镀钽时供给活性钽粒子的总是比方法工艺简单，操作方便，效率高。为充分利用和节约使用昂贵的钽探索了一条实用可行的途径。     

基于多库优化调度的人工异重流原型试验研究

自2004年开始,黄委在小浪底水库进行大规模的人工塑造异重流排沙的原型试验,取得了宝贵的原始资料。2006年6月调水调沙运行后期,黄委防汛调度部门面对复杂的条件,利用多库联合调度和水流衔接技术,优化万家寨、三门峡、小浪底3座水库的调度运行,最终在小浪底成功塑造了人工异重流并排沙出库。此次异重流的排沙比为历次人工异重流的最大值,实际观测到的异重流过程有其独特的特点,证明了调度的科学性。     

等离子体显示技术

本文详细介绍了等离子体显示技术的基本原理，性能特点，关键技术及彩色显示技术的最近进展。     

黄河内蒙古河段典型凌情过程模拟

近十几年受人类活动和气候变化等影响,黄河内蒙古河段冰情出现新的特征,突发凌情频繁出现,原有的内蒙古河段冰模拟方法已不能满足当前凌情防治的需要,亟待建立能反映凌情物理特性变化规律的河段冰情动态发展数学模型。在实测资料基础上,研究了黄河内蒙古河段冰情时空变化规律,以及河道资料不完整、支流流量资料缺乏及冰桥位置的确定等问题。应用一维冰情数学模型模拟2012—2013年凌汛期黄河内蒙古河段冰情发展过程,并对水温、冰盖厚度、冰盖前沿发展和流量的模拟值和实测值进行了对比分析,模拟值和实测值吻合较好。本研究为黄河防凌提供科学依据和方法支撑,也为天然江河、人工渠道冰情全过程模拟提供了研究思路和技术手段。